The 59.F0 error is a common issue faced by users of HP LaserJet printers, indicating a problem that halts printing operations. Understanding the root causes and solutions for this error is crucial for maintaining the efficiency of your printing tasks.
What is the 59.F0 Error?
The 59.F0 error typically signifies a transfer alienation failure, where the Intermediate Transfer Belt (ITB) becomes stationary and cannot rotate properly. This malfunction can disrupt the transfer process during printing, leading to operational errors.
Causes of the 59.F0 Error
Several factors can contribute to the 59.F0 error:
- ITB Obstruction: The ITB may be obstructed or improperly seated, preventing it from rotating.
- Faulty SR9 Sensor: The primary transfer roller disengagement sensor (SR9) might be malfunctioning, failing to detect the ITB’s position accurately.
- Fuser Drive Assembly Issues: A defective fuser drive assembly can impede the ITB’s movement, triggering the error.
Affected HP Printer Models
The 59.F0 error has been reported in various HP LaserJet models, including:
- HP Color LaserJet CP3525
- HP Color LaserJet CP4525
- HP Color LaserJet CM4540
- HP Color LaserJet M651
- HP Color LaserJet M680MFP
Steps to Resolve the 59.F0 Error
To address the 59.F0 error, follow these steps:
- Power Cycle the Printer:
- Turn off the printer and unplug it from the power source.Wait for about 2 minutes.Plug the printer back in and power it on.
- Inspect and Reseat the ITB:
- Turn off the printer and open the appropriate access panels to locate the ITB.Carefully remove the ITB and check for any obstructions or damage.Reseat the ITB securely back into its position.
- Test the SR9 Sensor:
- Access the SR9 sensor, typically located near the fuser assembly.Perform a manual sensor test using the printer’s diagnostic menu to verify its functionality.If the sensor is unresponsive or faulty, consider replacing it.
- Examine the Fuser Drive Assembly:
- Inspect the fuser drive assembly for signs of wear or damage.If defective, replace the assembly to ensure proper ITB movement.
- Consult HP Support:
- If the error persists after performing the above steps, contact HP Technical Support for professional assistance.
Conclusion
The 59.F0 error in HP LaserJet printers is primarily associated with ITB rotation issues, often due to transfer alienation failures or sensor malfunctions. By systematically inspecting and addressing potential causes—such as reseating the ITB, testing the SR9 sensor, and examining the fuser drive assembly—you can effectively resolve this error and restore your printer’s functionality.
FAQs
Q1: What does the 59.F0 error indicate in HP printers?
A1: The 59.F0 error indicates a transfer alienation failure, where the Intermediate Transfer Belt (ITB) is unable to rotate properly, disrupting the printing process.
Q2: Which HP printer models are commonly affected by the 59.F0 error?
A2: Models such as HP Color LaserJet CP3525, CP4525, CM4540, M651, and M680MFP have reported occurrences of the 59.F0 error.
Q3: Can I fix the 59.F0 error myself, or do I need professional assistance?
A3: You can attempt basic troubleshooting steps like reseating the ITB and testing the SR9 sensor. If the error persists, it is advisable to seek professional assistance.
Q4: How can I prevent the 59.F0 error from occurring in the future?
A4: Regular maintenance, such as cleaning internal components and ensuring proper seating of parts like the ITB, can help prevent the 59.F0 error.
Q5: Is the 59.F0 error covered under HP’s warranty?
A5: Warranty coverage depends on your printer’s warranty status and the specific terms. Contact HP Support to determine if the repair is covered.
